Nidavellir + 2 Expansions insert - Free 3D Print Model

Search models, users, collections, and posts

Gausshunter

Tools>Organizers

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

6.5 h

3 plates

4.8(4)

Open in Bambu Studio

Boost

Released

Description

the insert is designed to fit exactly into the box

Comment & Rating (19)

@user_3050365309

Here are the dimensions of the official sleeves, I don't know if you can adapt your model. I would really like to be able to use it. Thank you

The designer has replied

Show original

@gausshunter

I think if I enlarge the insert this much, it won't fit in the box anymore :(

Show original

@user_3050365309

Replying to @gausshunter :

Ok shame I will try

Show original

@CR0N0S38

Super insert! The part retaining the pieces might have required a slightly wider design to prevent a gap with the box and a slightly lower one to hold the first piece. Thank you for your work!

The designer has replied

Show original

@gausshunter

thanks for the feedback :)

@gausshunter

space above the treasure part is designed for scoring pads

@CR0N0S38

Hello, I wanted to discuss this void. I filled it with duplicate promotional cards

Show original

@giupinho

do the cards still fit if they are sleeved

The designer has replied

Show original

@gausshunter

hi, yea

@user_235515145

Hello, it doesn't work with the official sleeves

The designer has replied

Show original

@gausshunter

Hi, what are the dimension of your packaging ?

@Sirmiwi

Do sleeved cards fit

The designer has replied

Show original

@gausshunter

yea

@user_4238231209

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great.

@don_dad

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@gausshunter

thanks for feedback and 5 stars :)

@mToldi

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The profile uploader has replied

@gausshunter

thanks for feedback

@Zakarfin

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.