Fibonacci Spiral Tree Fidget Toy (Large)

The Fibonacci sequence, also known as the golden ratio sequence, is found in nature, where many plants’ flowers and leaves grow following the sequence, allowing them to fully utilize sunlight and air

This model utilizes the Fibonacci sequence and the principle of inertia, requiring no glue and is simple to assemble, making it fun and relaxing

Small spiral tree link: 传送门

Medium spiral tree link: 传送门

Filament:

The actual pictures use Bambu PLA Matte Ivory White 11100 click to buy

Feel free to leave a comment if you have any questions

Assembly Instructions:
Following the direction of the diagram, match the parts with the numbered markings, ensuring that the side of the parts with the pillar faces down, aligning them with the grooves of the parts below, and install them one by one

If the gap at the top is too small after assembly, affecting rotation, you can print a taller grip (a separate print configuration has been uploaded) to replace it, or remove the middle X

Order:

3D Printing Precautions
In my experience, the following points should be noted for daily printing:
1. Regularly clean the printing plate! If possible, it is recommended to wipe the printing plate with a damp cloth before each print to reduce the first layer from not sticking or falling off
2. Pay attention to the drying of the filament. Use AMS to replace the desiccant in time, to reduce stringing
3. Update the desktop slicing software and mobile APP to the latest version, and update the printer firmware in time
 

You can consult customer service for more questions and precautions, or check out theBambu Official Wiki:
Bambu mobile APP (Bambu Handy) printing tutorial click to view
Filament and accessories common problem guide click to view
Bambu desktop slicing software (Bambu Studio) printing tutorial click to view