Search models, users, collections, and posts
Radiomaster MT12 GoPro or DJI or Insta360 Mount
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill Mixed Material Supports
Designer
1.3 h
1 plate
Open in Bambu Studio
Boost
20
63
2
1
69
30
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
I tried another mount from a different site and it fit poorly and was not a “good” design in that it had no face that would sit flat on the bed. I started from scratch with the intent to have the hardware embedded into the part instead of taking the nut from another mount. This requires a 5mm heatset insert. Specifically I used these from Amazon. https://www.amazon.com/gp/product/B09VL5RLLR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
And inserted them with this.
https://www.amazon.com/gp/product/B0BJ6DT2PC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
A regular soldering iron will also work.
You will also need (2) 3mm x 8mm long screws, I used button head style.
I would recommend PETG or ASA or ABS for this print.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (2)