Circle Ruler / Circle Template 1-12 mm

This is a circle ruler with circles from 1 mm to 12 mm. The circle sizes are marked on the upper side. For each circle there are also alignment markings. For convenience, I also added a normal 20 cm ruler with mm divisions on the bottom.

For clear markings, set the outer wall line width to 0.25 mm. You may need to drill out the 1 mm hole with a 1 mm drill bit.

You can print this in two colors to make the markings more visible. I included a pause before the final two layers so you can switch filament here if you don't own an AMS.

If you have suggestions or an even better print profile, feel free to add them. Also leave a like if you enjoy the model.