Rc jet boat
Print Profile(0)
Bill of Materials
- x 1:
Description
This little jet boat is simple but fun, it is capable of driving along in rushing water. I personally use the power system from a joysway madflow but i have changed the high kv motor to a 800kv motor. It,s a 30 A system but i believe that an 40A system with a 1500kv motor would be optimal for this boat. The model is made for the motor mount that is in a madflow, but you can make your own mount. In addition to the electronics, a steel wire is needed for the steering and a few m3 screws. I also use a cut driveshaft from a small hobby boat. I recommend that you print all parts separately. The lid of the boat is a bit boring but that's why I posted the files separately so you can decorate it and maybe build a roll cage. I recommend using the propellers that are made to spin clockwise.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)