Geckos Are For Lovers

cover

plate_1.png

plate_2.png

2024-10-27_d2af807b08a708.jpg

<p>I have only printed the rear with supports, but I'm not sure how necessary they are, so feel free to try without if you want.&nbsp;</p><p>Flushing volume was increased to 1.19 to have no red bleed in the white, adjust to your liking.</p>

0.2mm layer, 3 walls, 10% infill

box_plate

Lightbox

znibb

Skärmavbild 2026-01-23 kl. 16.13.29.png

plate_3.png

plate_4.png

GM 3D Print

476915994_1354633402331734_1006874958977252381_n.jpg

<p>Print <strong>two Marvel Lightboxes at the same time</strong> with this optimized batch profile!<br>Designed for efficiency, this setup saves you time and keeps both prints consistent. Perfect for anyone making multiple lightboxes for gifts, events, or resale.</p><h3>Features</h3><ul><li>✅ <strong>Batch Printing</strong> – 2 models on one plate</li><li>✅ <strong>Optimized for PLA</strong> – 0.2 mm layer height, 3 walls, 15% infill</li><li>✅ <strong>Fast &amp; Reliable</strong> – tested successfully on Bambu A1 Mini / A1</li><li>✅ <strong>Consistent Quality</strong> – same orientation, same supports, same finish</li></ul><h3>Recommended Settings</h3><ul><li>Nozzle: 0.4 mm</li><li>Bed adhesion: Brim (recommended)</li><li>Filament: PLA+ or standard PLA (light colors work great for LED glow)</li><li>Print Time: ~2× the single version, but saves setup cycles</li></ul>

Marvel Lightbox – Batch Print (2 at Once, 0.2 mm Layer, PLA)

invader

Marvel Lightbox

<p>Remix of the Marvel Lightbox that only had the .STL available. Increased size to 125%, setup for AMS printing, added a hole on the rear for non battery powered LED strip.</p>

ASIA

Print Profile(3)

Description

Comment & Rating (164)

This remix is based on

License

Related Models