Articulated Cute Crab
Print Profile(12)
Description
Tips for printing:
- Filament: PLA
- Supports: No!
- Layer height: 0.16mm(0.15mm) or 0.2mm
- Wall loops: 3
- Infill: 15%
- Seam position: back
- Wall generator: Classic
- Detect thin walls: No!
- Brim(Multipart): Use only brim on the eyes if you have problems with adhesion! Don't use a brim on the other models!
- BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!
- Info!!: Do not scale the Crab any smaller otherwise the connections will no longer work!
- Info!!: If you apply too much force to the legs they may break because the connections are small!
- Info!!: Please be careful when removing the Crab from the print bed!
------------------------------------------------------
❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.
------------------------------------------------------
Colors and filament I used (3 Color):
- PLA Matte / Red
- PLA Matte / White
- PLA Matte / Black
Or decide for yourself which colors and how many you want to use!
ℹ This model is very filament wasteful please keep that in mind! When you decide to print my multicolor Pre-Sliced (3mf file) I would recommend printing several models at once, not just one, to reduce waste!
------------------------------------------------------
ℹ New multicolor version (12.07.2026) (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling!
(Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)
You can now print the crab in multiple Parts! I made a little assembly guide:
- Press the left and the right eye into the guide and glue them on
2. Glue the inner_eye_left and right peaces on
3. Finished!
- 23.12.2024 = Added Multipart
- 12.07.2026 = Added New Multicolor Model
Boost Me (for free)
If you enjoyed this model, please consider boosting it to support me to further develop creative and more cute looking designs🥰. Thank you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1351)