Modular Media Shelving

[Introduction]

I was looking on Amazon for a media shelf/bookcase for all my blu-rays and video games. There was a review on one particular item that spurred me into action. The reviewer mentioned about how cheap the product was, but that it'd get him by until he could build something better. Hmm, build something better.

So instead of getting a cheap media shelf of questionable quality off of Amazon I decided why not, why not just make it myself! And thus, this project was born. A modular media shelving system. I wanted a system that was stylish and that I could expand upon as I collected more media. I wanted to have the option to be able to easily secure it against the wall. I planned to use it in a bookcase configuration, but I also liked the idea that it could be used as a standalone shelf too, built up to make more interesting shelving systems for.

There's two sizes, a Regular and a Half wide. The spacing is such that the shelves can be staggered; just be aware that the X is differently sized then the Y, so they can't be rotated as such and still have everything align.

There's little connectors to connect everything together, and uses Bambu's m3x8mm self tapping screws to secure everything. I've included a tool to help keep things held tight while you screw it together.

[Printing Info]

It should be an easy print, but it can be prone to warping. This can be alleviated by turning off the Aux fan while printing. Additionally, I try and not let my print room get too cold, so overall the tempratures inside the chamber are more stable.

[Hardware & Filament]

(Full disclosure, I am part of the Bambu Affiliate Program. All Bambu store links are affiliate links. I earn a small commission from these links without any added cost to you. These links help to support me so I can bring more content for free!)

Featured Filaments:

Shelves

• Bambu PLA Matte Marine Blue
• Bambu PLA Matte Grass Green
• Bambu PLA Matte Lemon Yellow
• Bambu PLA Matte Scarlet Red
• Bambu PLA Matte Mandarin Orange

Connectors

• Bambu PLA Metallic Iridium Gold

Hardware:

(Full disclosure, I am part of the Amazon Affiliate Program. All amazon links are affiliate links. I earn a small commission from these links without any added cost to you. These links help to support me so I can bring more content for free!

• M3x8mm Self Tapping Screws. (I recommend Bambu's M3x8mm self tapping screws in this case, as their lower head height works well with this application. Something like this Self Tapping screw from Amazon should work well too)

[Assembly]

-------

If you like my work, consider showing your love by Buying me a coffee. Additionally, if you're looking to sell prints of my design, please check out my Patreon page for more information. Additionally, you can follow me on Youtube for videos covering some of my models, and Instagram.