Obito Mask - Free 3D Print Model

Search models, users, collections, and posts

Ultra_violet

Props & Cosplays>Masks & Helmets

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

3.2 h

1 plate

4.7(28)

Open in Bambu Studio

Boost

611

1296

967

266

Released

Description

Scaled down of Obito Mask with two holes at both sides, designed for the threading a rope through to secure the mask.

Trim and clean the edges of the entire mask with trimming knife for smooth finish.

Comment & Rating (48)

@smartasianguy

how the FUCK am i supposed to wear this 😭😭😭

@Bidoof17

scale it up?

@bTonyd

i laughed way too hard on this one:))) and i dont know why. You can scale it easily in bambu studio

@CremeDeLaCreme

Replying to @Bidoof17 :

newbie here how can I scale up from the bambu app?

@rarein3d

Print Profile

0.2mm layer, 3 walls, 15% infill

scaled it up, I had actually had it scaled higher before (which would be been better) but the support broke halfway through, I just didn’t think to add more support trees. for a head I recommend 180mm scale, this is 150 I think, it’s okay for head size, but a tiny bit small. but other than that, printed very well

@Cmba1

I am trying to print a large mask but when I click your print profile I think it’s still the small mask on there. I’m pretty new, how do I make mine bigger?

(Edited)

@rarein3d

Replying to @Cmba1 :

u need to use the desktop app and scale it up to 180mm or so, I just linked this page in ChatGPT and it told me how to do: Apply Scale in Bambu Studio • Select the mask in the build area. • Click Scale → toggle Uniform Scale ON. • Either: • Enter a scale factor (e.g. if original bounding width is 150 mm, then 181.5/150 ≈ 1.21 → set scale to 121%). • Or enter a target X dimension of ~180–185 mm (your slicer will auto-scale Y and Z). (just know if u scale it up that big, u need more supports, ask how to do that ChatGPT, avg adult head size is 180mm)

(Edited)

@Cmba1

I ended up figuring out how to do the Up scaling, I feel like a movie hacker now.

(Edited)

@Miguelga

Print Profile

0.2mm layer, 3 walls, 15% infill

genial

The profile uploader has replied

@user_3516542503

Looks Great :)

@soddco

Print Profile

0.2mm layer, 3 walls, 15% infill

Easy to print, not much waste from supports and the ails are great. great job

The profile uploader has replied

@user_3516542503

Thank you for sharing!

@user_2160574256

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Stampa perfetta!

@gatsurendo

Print Profile

0.2mm layer, 3 walls, 15% infill

came out with no issues. still plan on painting it. Done with Bambu Gray PLA Basic on the A1 combo.

@HooliganJZX

This came out awesome imo, I painted the black in and I printed eyes on paper and taped them in the back to give it some life since it's going on the wall. I used a caliper and measured my other obito mask and scaled it that way. Awesome design!