Print Profile(1)
Description
I have created a new Hueforge and I am happy to share it with you. I am particularly interested in your feedback. Have fun printing!
Print with 100% infill at a layer height of 0.08 mm and a base layer of 0.16 mm.
The model is 199.99 x 201.52 mm in size.
You can print with higher layer heights as long as they are below the minimum depth of 0.24 mm.
The maximum depth is 2 mm, and the actual depth is 2 mm.
Filaments used:
- PLA BambuLab Basic Black Transfer distance: 0.6
- PLA BambuLab Basic Beige Transfer distance: 8
- PLA BambuLab Basic Jade White Transfer distance: 5
This print uses 3 unique filaments.
Switching instructions:
- Start with Black.
- Switch to Beige at layer #10 (0.88 mm).
- Switch to Jade White at layer #17 (1.44 mm) and print the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)