Musical Trophy by Petru Simion

Petru Simion

Art>Other Art Models

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 10% infill

Designer

1.1 h

1 plate

5.0(7)

(1 plate by layer) 0.2mm layer, 100% infill on base, ironing.

1.7 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

Released

Description

A simple trophy designed for a school musical contest (everyone will get one hence the lack of inscriptions).

Made in 2 parts to print flat, ( you might have to split to object).

35 G in total with 10% infill and 1h 8min with calibration and support for the small tab.

I highly recommend to add some weight in the base, you can do so by inserting a negative volume and adding a stop just before closing that volume so ypu can add “weight” and hit resume.

I will update the post with real pictures ASAP.

Comment & Rating (14)

@azretracr

Print Profile

0.2mm layer, 2 walls, 10% infill

This is too cool! I made a couple modifications and have uploaded a profile with those changes. I printed both on the same plate by object rather than layer and used ironing on all top surfaces of the treble clef. Additionally, for the base I used 100% infill. It adds about 20g of material but gives it a good amount of weight to it meaning you don't have to add any additional, mine stands just fine. The only problem I had was the opening in the base is a bit larger than the tab on the clef so it's not a firm fitting, you will need to glue it in (which is easy enough). I'm sharing a picture of the backside because I added text. Thank you for sharing this!

The designer has replied

@petrusimion45

Awesome! I had to make 44 of these with 2 colours on them, and all that in one week, this is why i skipped using ironing, and also the reason for the bigger opening since i had to glue them ( required by the person who wanted these). Really glad you enjoyed.

(Edited)

@azretracr

Replying to @petrusimion45 :

Totally understandable! Great model nonetheless and it was very well-received by its recipient. Thanks again!

(Edited)

@petrusimion45

Replying to @azretracr :

Realized it was unstable only after printing the first one, therfore the recomandation in the description for adding a negative volume and pausing to add weights. Thank you for choosing this model!