The Mana Slanger - Free 3D Print Model

Search models, users, collections, and posts

Neon Zaku

Toys & Games>Board Games

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

7.7 h

1 plate

4.5(11)

Open in Bambu Studio

Boost

195

297

146

Released

Description

Scan assistant for Manabox, with built in phone platform, use C-clips to adjust the height as needed. Easily scans up to about 170 cards at a time.

no supports needed. works best in white.

-Design Heavily Inspired by card slinger 1.1 by u/I86o on reddit.

Comment & Rating (21)

@Sness

"-Design Heavily Inspired by card slinger 1.1 by u/I86o on reddit." Model design and even name stolen from here: https://www.reddit.com/r/mtg/s/1uexrFGVCt

The designer has replied

@Neon_Zaku

Design is not stolen, and I've spoken with the I86o, note the heavily inspired quote. stop slandering. please stop commenting.

@blackpixel

Boosted

This is a non-issue. The cardslinger guy got the credit he wanted. He actually had a big convo on this post and he deleted his comments after the issue got resolved. The Mana Slanger was designed, made, and released before card slinger version 1.1 was even released, how can you copy something that doesn't exist?

(Edited)

@Sness

Replying to @Neon_Zaku :

Weird how you never acknowledge that you couldn't even come up with a unique name and had to steal that too.

@kcrit42q

does the color matter at all?

@blackpixel

Boosted

yes, print in clear or white

@user_80327217

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed well, the design could be improved, excessive material usage in the box, and the top plate could be designed more rigidly (two stiffeners on the underside would make it properly stable) as it is somewhat wobbly, but since the phone only rests on it everything works perfectly! Thank you very much!

Show original

@magatsu

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Great print, no problems

@jclabeaux

Boosted

Would be nice to have a bigger size that works with sleeved cards as well.

@blackpixel

Boosted

Increase the scale by approximately two percent

Show original

@jclabeaux

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Works great! I'd agree to maybe make the slope a little steeper.

@blackpixel

Boosted

🤙🤙

@sarchopilus

Print Profile

0.2mm layer, 2 walls, 15% infill

Would prefer a slightly steeper ramp. Using a piece of packing tape to smooth out the ramp. Definitely helps load.

@thickasscowboy

Print Profile

0.2mm layer, 2 walls, 15% infill

Other Issues:the bar support for the phone platform is a bit too snug and jams if not slightly sized down or sanded aside from that print works as intended

@dial33

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.