Black Myth Wukong Mask - Free 3D Print Model

Search models, users, collections, and posts

sccccccccd

Fashion>Other Fashion Models

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.16mm layer, 2 walls, 15% infill

Designer

18.3 h

1 plate

4.8(45)

0.16mm layer, 2 walls, 15% infill

20.5 h

1 plate

5.0(9)

Open in Bambu Studio

Boost

956

2002

196

1.5 k

517

Released

Description

The Nuo face worn by Wukong in the Black Myth Wukong Mask.

There are holes on both sides to hold the straps.

mask

black myth wukong

Comment & Rating (80)

@G33kxican

I hope it helps

@tmontagnoni

Merci !

The designer has replied

@sccccccccd

So cool!!!!!

@scottdunsmore44

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

even the tree supports turned out excellent!!!!!!

@Haxxsaw

What filament is that you used?

@scottdunsmore44

Boosted

Replying to @Haxxsaw :

DUDV2 Fast Rainbow PLA Pro

@Haxxsaw

Replying to @scottdunsmore44 :

thanks, it looks great

@pedroikkan

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Really nice print. Just the supports that are really hard to remove.

@BaneTudajfor

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Awesome mask. I love it. Printed flawlessly. Can't wait to take it out to a Halloween party.

@user_324563903

Boosted

A very beautiful model. I used too much strength removing supports and cracked it along layer line around teeth area because I am dumb. But that is my fault, naturally. Also, I was printing with dry PETG HF using PLA as support interface (all Bambu brand and in the AMS) and the prime tower failed about 1/3 of the way up. So it came out a bit hairy haha. I am not sure how to fix that. Maybe I should not be using a prime tower when I am using support material?

The designer has replied

@britfaic

I hadn't thought about that before, but it does make sense. The whole point of the support material is that it doesn't stick together.

@sccccccccd

I printed with PLA (support is also PLA), I think there must be a problem when converting between PETG and PLA. In fact, PLA is robust enough.

@RYZU

Boosted

thank you. I used adaptive layers with a fairly high quality - A1 23hrs.

@FractalSauce

Printed it standing upright (rotating it 45 degrees) this saved me a lot of time and support material. It printed in 12 hours, but I also changed some speed settings and changed layer height to 0.20mm and for models that I intend to sand/paint, I always use 3 walls.

(Edited)

@vladriepin

Print Profile

0.16mm layer, 2 walls, 15% infill

Great design 👌

@Weekend_Willy

did you have any issues sizing it up ?

@Straight_Classy

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

fun!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.