Search models, users, collections, and posts
Ultimate Ice Scraper
IP Report
Print Profile(15)
0.2mm layer, 4 walls, 10% Gyroid infill
Designer
1.5 h
1 plate
![[PETG | 120%] 0.16mm layer, 4 walls, 20% infill](https://makerworld.bblmw.com/makerworld/model/US6ff5612f19b94e/design/2023-12-05_d9abb99e4d5198.jpeg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
[PETG | 120%] 0.16mm layer, 4 walls, 20% infill
2.6 h
1 plate
0.2mm layer, 6 walls, 20% infill, Generic PLA High Speed
2 h
1 plate
ABS - 120%, 0.2mm layer, 4 walls, 25% infill
1.8 h
1 plate
Click to see more
Open in Bambu Studio
Boost
1530
3847
1283
590
12.7 k
10.6 k
Released
Description
It's -8℃ currently where I am. I needed a new ice scraper.
It's strong and I've gone through several iterations to get it to feel comfortable in the hand.
There are ribs along the handle for better grip as well as a large indentation at the top to help push when hitting the stubborn ice patches on the windscreen.
This one can be printed in PLA, but would also be great in ABS/ASA or PETG for durability in cold weather and under UV from the sun.
I would suggest at least 4 wall layers, o.2mm wall heights, at least 15% infill.
Print flat without any support. Brim might be useful to help with warping, especially when printing in ABS or ASA.
Stay warm out there!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (1283)