Lightbox / lithophane The North Face X Goku
Print Profile(1)
Bill of Materials
Description
The AMS is required to print the lithophane that will be embedded in the lamp.
The lithophane has a 0.1 mm interlocking tolerance, while the rear cover is 0.2 mm (this will need to be glued, but if necessary I can upload a 0.1 mm tolerance cover).
Bambu Studio Settings:
For the box:
The settings were copied from the marvelous work of Braga3Dprint
- preferences (ctrl + P) → enable developer settings → Quality → Advanced → First layer flow ratio: 1.04 to 1.08
- Quality → Wall generator → Arachne
- Quality → Wall transition angle threshold → 50º
- Resistance → Advanced → Infill/wall overlap → 20% to 25%
- Quality → Advanced → Avoid crossing walls
- Increased retraction/decreased temperature may help reduce stringing
- Print color order from lightest to darkest
For the lithophane:
-Layer height: 0.1
-Density 100% rectilinear infill pattern
Caution for X1C users, remove the purge line. The lid may come into contact with it
Lithophane
If you would like a different character for the lithophane, feel free to ask me.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)