Search models, users, collections, and posts
Webcam Arm / Holder for Monitor Stand Poles
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
22 min
1 plate
Open in Bambu Studio
Boost
38
113
6
2
186
53
Released
Description
A simple arm to hold my C920 webcam which slides on the monitor stand pole.
On the Webcam side I have a 6.2mm hole to fit a M6 screw which fits the thread on the C920.
I used a M6x12 and sized the height of the arm for a good fit.
It fits my 35mm pole and the circle-mid-point length is 145mm which fits my requirements.
If you need other dimensions, please use the uploaded SolidEdge .par parametric file to adjust length, height, diameters, etc.
SolidEdge Community edition is free and without functional restrictions. You just can't use it commercially: https://resources.sw.siemens.com/en-US/download-solid-edge-community-edition/
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (6)