Search models, users, collections, and posts
Blue Jackets Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
7.4 h
1 plate
Open in Bambu Studio
Boost
10
26
2
1
10
5
Released
Description
Project: 4 blue jackets.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyTerra Army Blue Transmission Distance: 0.3
PLA PolyTerra Lava Red Transmission Distance: 1
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Army Blue
At layer #10 (0.88mm) swap to Lava Red
At layer #11 (0.96mm) swap to Marine Blue
At layer #15 (1.28mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (2)