Motor Mod For Standard Linear Actuators with N30
Print Profile(1)
Description
Boost Me (for free)
If you like my model, don't forget to boost !
N30 motor mod for standard linear actuators
You are in the Construction RC hobby ? Or you simply like these simple and cheap little actuators ?
But they are not strong enough to your liking ?
Here is the solution ! With this 3d printed casing, you can change the old N20 motor you have in your old actuators and boost their performance by putting a bigger motor. Yes, a bigger motor đ.
It is very easy to modify your actuators : order the right motor, change the gearbox, swap the motor and reassemble ! It even reuses the same screws for the casing !
I strongly recommend printing it with a layer height of 0,1mm, and minimum PETG, as PLA is not strong enough.
Even if i did not measured the strenght boost, i can tell you it is at least 1.5x stronger ! For a 64N actuator at 15mm/s, that means that it becomes a 96N actuator ! Pretty impressive !
The lenght of the actuator wit the new casing is only 6mm longer !
You can order your new N30 motor here (not affiliate link) : https://fr.aliexpress.com/item/1005006225386642.html?spm=a2g0o.order_list.order_list_main.122.64eb5e5bHG66JV&gatewayAdapt=glo2fraÂ
Thanks for considering my mod and don't forget to like !
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)