Scale pressure grinder Mazzer Super Jolly
Print Profile(1)
Description
A ring to assist in regulating grinder pressure. Attachment requires drilling two small screw holes—omitted from the design as placement depends on the initial granule point; the 0 or 5 position may vary:
Tested on a Bambulab X1C with a 0.4 nozzle, a Bambulab A1 with a 0.2 nozzle, and a Prusa MK3s+ with a 0.4 nozzle.
-_-_-_-_-_-_-_- ************* -_-_-_-_-_-_-_-
Ring to help control the pressure of the grinder. To fix it you must make two small holes for the screws, which I have not included in the design as placement depends on the starting granule point and the position at 0 or 5 may vary, as shown in the image above…
Tested on a Bambulab X1C with a 0.4 nozzle, a Bambulab A1 with a 0.2 nozzle, and a Prusa MK3s+ with a 0.4 nozzle.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)