Singh Design

cover

IMG_5766.jpg

plate_1.png

IMG_5768.jpg

Tree support 0.2mm layer, 2 walls, 15% infill

2024-10-24_06ceccea78644.jpg

0.2mm layer, 2 walls, 15% infill

MadDog2125

Hanayama Box Puzzle.jpg

If you&#39;re like me and sometimes don&#39;t mind gluing things together if it means I can avoid using supports, then this print profile might come in handy. I cut the box in half and flipped the top half. 4 drops of super glue, one for each pillar, worked well for me (see photo). I also used a 0.16 mm layer height for a slightly finer finish on the ring, and I set the print sequence to print by object so I could print the ring and box in different colors without multiple filament changes. For printers with smaller print beds (e.g., A1 mini), you may need to rearrange objects or split them onto 2 separate plates.

0.16 mm layer, No Supports, Print by Object

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Hanayama Cast BoxUpdate 28.11.2024 .Uploaded new profile With tree supports.For easier removal.

Hanayama Box Puzzle

ASIA

Print Profile(3)

Description

Comment & Rating (67)

License

Related Models