Rain Gutter Downspout Cover (2x3, 3x3, 3x4 inch)

Cover for rain gutter downspouts.  Fits 2x3, 3x3, and 3x4 (parametric) down spouts with wire mesh cover to keep rodents out.

I had a problem with mice and chipmunks getting into my downspouts.  This cover keeps them out an looks fairly nice.

Print both the cover and face, facedown w/ support for the wire mesh cutout.

I had some old ¼" hardware cloth at home to use.  But, something lit this should work fairly well (https://www.menards.com/main/building-materials/fencing/utility-fencing/1-4-x-3-hardware-cloth/1713121/p-1532586466863-c-5768.htm).

If you need to make this a different size, move the screws, or change the sizes in anyway, I also uploaded the openSCAD file that have variable you can adjust.  Just make sure you adjust them for both the face and the sleeve so they match.

Used M3 screws with round heads (and nuts, set into the design, so no wrench is needed, just the hex driver for the screw).  But, if you need/want something different, just modify the .scad files in OpenSCAD.