The Internet - Replica
Print Profile(1)
Bill of Materials
- 5MM LED BEZEL (~$10 for bulk amount): A small metal housing for an LED, to make it look official. x 1: https://a.co/d/fo356Bc
- 5mm BLINKING RED LED: (~$11 for bulk amount)A small blinking red light." x 1: https://a.co/d/0gdQUSM
- On/Off Pushbutton Switch(~$11 for bulk amount) x 1: https://a.co/d/dRWbMhp
- 9Volt battery Connector - (~$6 for bulk amount) x 1: https://a.co/d/7KR6x0p
- 9Volt battery x 1: https://a.co/d/eN4hIcl
Description
Boost Me (for free)
So I can make more awesome things!
Behold….I present to you….
THE INTERNET.
Look no further than this 3D printed replica model of "The Internet", a replica prop device that may have been featured in a popular TV show.
“It's so small!”
“It's so light!”
“It's WIRELESS!”
Turn the device on by pressing the button located within the hole on the side.
The LED on top will blink at a steady, medium rate.
Turn the device off again by pressing the same button on the side.
Model Parts
• Main Body: Top of main body - a black plastic box with a hole for an LED, hole for a 5mmBezel, and hole for a Pushbutton Switch.
• Main Base: Bottom of main body, including a 9V battery holder.
OTHER PARTS YOU WILL NEED - PURCHASE SEPARATELY ( about $38 Total for bulk parts)
(Listed Below)
-------------------------
ASSEMBLY PART 1:
Place the bezel in the hole located in the top piece of the main body, secure it with a nut on the other side,
Place the LED in the bezel from underneath, tape or glue it in place.
Place the pushbutton in the side hole and secure with nut from other side
SOLDERING:
Simply solder the wires by doing the following:
connect the red + LED wire to the red + 9v Battery connector wire,
connect the - black battery connector wire to the - black wire of the switch,
connect the + other wire of the switch to the + black wire of the LED.
ASSEMBLY PART 2:
Connect a 9V battery to the battery connector and place the 9v battery in the battery holder on the base.
Place the top part of the body onto the base.
This assembled model has 5 parts that you'll need to source separately. Once assembled, it's ready to be proudly displayed on a PETAL STOOL… a petal stool…. what the heck is a petal stool??? ”
FEATURES:
• Unique Design: If someone asks about the internet, you can proudly wave at this device and say “This…. is the internet”.
• Easy Assembly: Kind of like that house of cards that a certain IT Technician was pretending to build.
• Demagnetized: Stephen Hawking would be proud.
• It's So Light!: “Of course…. The internet doesn't weigh anything..”
• It's WIRELESS! “Oh yes - Everything is wireless nowadays, isn't it?”
Boost Me (for free)
Enjoy the model?
License
Comment & Rating (10)