Print Profile(1)
Description
You may print the holder with a 0.4mm nozzle, for everything else I recommend a 0.2mm nozzle.
Also, print the Flag very slowly; I use 15mm/s for the first layer and 25mm/s for infill.
Check out my KEYCHAIN for your CAR!
With the flag, it is a bit of a fiddly job at the beginning.
You can use some glue in the holder, but I didn't need to.
USE Myriad Arabic font and a text thickness of 0.4!!!!
You can use a 0.4mm nozzle for the holder as well as the license plate, but I would still recommend a 0.2mm nozzle.
For the flag, use a 0.2mm nozzle and print the first layer as well as the infill very slowly!
I also have a keychain for the car!
With the flag, it's a bit of a fiddly job at the beginning.
You can use some glue in the holder; I didn't need it.
USE Myriad Arabic font and a text thickness of 0.4!!!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)