Lady Death - Hueforge

I think this really came out great! It's a 6-color print, so you either need 2 AMS units, or enough patience to do 6 filament swaps. :) But I really think the end product makes it worthwhile!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA BambuLab Basic Beige Transmission Distance: 8
PLA PolyLite Polymaker Teal Transmission Distance: 0.5
PLA PolyLite White Transmission Distance: 5

This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #12 (1.04mm) swap to Marine Blue
At layer #15 (1.28mm) swap to Beige
At layer #20 (1.68mm) swap to Polymaker Teal
At layer #22 (1.84mm) swap to White for the rest.

If you have a couple different shades of beige, my personal preference when printing this was to go kind of in the middle - not the lightest beiges, but not the darkest either.

If you resize the print, be sure NOT to resize the Z dimension!