Lime

0.12mm layer, 4 walls, 40% infill

打印的时候最好手动给底部加个支撑

It's best to manually add a support to the bottom when printing

user_3125105050

cpt3D

I used pla+ and it feel very similar to the real peak design clips. 

user_1718199691

3d mike

Printed in PLA with supports - worked out well enough to serve its purpose!

Bytesized_Techie

Ben Healey

Came out looking good. Connection is secure. 

Neruson

epochtrends

Great if you don’t want to buy the official camera strap.

webwurd

finniminni

cover

2023-11-24_1o1o6arlo5ri.jpg

plate_1.png

plate_1.webp

2023-11-24_1o1o6arlo5ri.webp

DKINT Customs

20250119_145609.jpg

20250119_145930.jpg

20250119_145926.jpg

Printed in PETG, and supports manually painted to improve printability and the cleanliness of the final print.  The angled print helps with the printing overhang of the tab, but also improves the strength by changing the layer line orientation. Ignore the stringing of my print, i desperately need to dry my filament, but it&#39;s a testament to the fact that even using worst case scenarios the supports and angled alignment help do wonders!

PETG Supports angled 0.12mm layer, 4 walls, 40% infill

Please make sure, your print can handle the weight of your expensive camera before using this design. I do not take any responsibility for broken equipment.&nbsp;

Print Profile(2)

Description

Comment & Rating (20)

License

Remixes (1)

Related Models

Camera Clip - Peak Design Anchor Links Compatible