Drill Press Tool Caddy [80mm Column)

I designed this tool caddy to hold some of the tools I use a lot on the drill press. It has space for two small coolant bottles, the chuck key, and my preferred countersinks, spot drill and center drill. There are optional toe clamps that hold the caddy against the upper rack retaining ring so the entire assembly rotates with the table. These may be omitted if you want the caddy further down. All of the pockets have small holes in the bottom so they do not collect chips. The upper surface is intentionally sloped so I'm not tempted to leave loose drills on it!

To assemble, you will need:
2x M6x50 socket head cap screws

[2x M6x60 socket head cap screws for toe clamps]
2x M6 washers [+2 for toe clamps]
2x M6 nuts [+2 for toe clamps}