TPU Google pixel 8 Case - Free 3D Print Model

Search models, users, collections, and posts

Jooa97

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 30% infill

Designer

3.2 h

1 plate

4.5(38)

Open in Bambu Studio

Boost

114

272

684

390

Released

Description

Designed this phone case for my Pixel 8 in Fusion360. It is designed to be printed in TPU or other flexible materials. Stiff materials wont work for this because you wont be able to press the buttons. Material settings in print profile worked nicely for Filamentum flexifill 98A and 40D. I'm very happy about how this turned out and the buttons work nicely when using a flexible material. To avoid curling i found it best to turn the AUX fan off.

Comment & Rating (58)

@jewzaam

Boosted

Great model, but as others noted the lip is a bit short resulting in sitting on the screen when face down. I tweaked it and printed a version with a taller lip but unfortunately cannot post it due to the license. Really liking the one with the modified lip, considering printing one with fuzzy skin on the outside for a wee bit of grip. Printed in Overture 95A.

@Atra

The creator updated the license to allow remixes if you still have the modified files to post.

@jewzaam

Boosted

Replying to @Atra :

Amazing, thanks for the update! I have posted my remix here: https://makerworld.com/en/models/1877196-tpu-google-pixel-8-case-slightly-deeper-mod#profileId-2009740 Still using the case 5+ weeks later and am _very_ happy with it. :D

(Edited)

@ModestWorkshop

Print Profile

0.2mm layer, 4 walls, 30% infill

Awesome model. I bought TPU just to print this model and I was over the moon with the outcome. Fits my phone really well and everyone is shocked how flexible this case is. The buttons work really well too. 10/10 from me.

@user_3501709226

Print Profile

0.2mm layer, 4 walls, 30% infill

Fits the Google Pixel 8 perfectly👍. Printed well.

Show original

@tworud

Boosted

Print Profile

0.2mm layer, 4 walls, 30% infill

perfect fit! thanks. EDIT: It's good I'm never buying anotger ❤️

@PaWa1990

Print Profile

0.2mm layer, 4 walls, 30% infill

Printed it with TPU 95A from Overture, worked smoothly so far and fits perfectly, but the stringing in the honeycomb is difficult to remove 😅 Thank you very much

The profile uploader has replied

Show original

@Jooa97

Thanks! If you have problems with stringing you should dry your filament and check retraction settings, TPU is very hydroscopic. You could also try using a lighter on the case to burn off the strings😁

@PaWa1990

I had dried it beforehand, residual moisture was around 10%, maybe I should have reduced the speed at the beginning? I will check the retraction settings, thanks a lot for the tips 😃 TPU is quite complicated I'm just realizing that 😅

Show original

@versanu

Hey @Jooa97 ! Could you maybe share the model of the phone itself? I'd love to model my own case but can't find any accurate model of the Pixel 8 online. Thanks!

(Edited)

The designer has replied

@Jooa97

Will do as soon as I get home from work in about two weeks. unfortunately I don't have access to the file right now.

@Atra

Any chance you could change the license to allow Remixes? I'd like to post one that's been adapted to work with Magsafe

The designer has replied

@Jooa97

Done :)

@Oddity3D

Boosted

Took this long to get a boost token but said I would boost ^_^

The designer has replied

@Jooa97

Appreciate!🤩

@Oddity3D

Boosted

Came out great, right middleground between strength and looks - Printed in AMS TPU Makerworld won't let me review because apparently I had an unsuccesful print (I didn't, must have accidently done something on the X1C review thing, will boost when I get a token 🙃)

The designer has replied

@Jooa97

Thank you! I might make a V2 with a mic hole and maybe taller edges based on feedback from others.

@cbedhomme

Not tall enough to properly attach to the phone Useless

The designer has replied

Show original

@Jooa97

Would you care to elaborate on your problem and maybe send a picture? I'm using this case as my daily driver and have had no problems. Did you print it in TPU?

(Edited)