Search models, users, collections, and posts
hueforge Rafa Nadal 1
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 15% infill
Designer
2.4 h
1 plate
Open in Bambu Studio
Boost
13
18
5
0
24
13
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm
The Model is 149.98x149.98mm in size
You may print at higher layer heights below the Min Depth of 0.5mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA smatfil White Transmission Distance: 6
This print uses 2 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #7 (0.58mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (5)