small sailboat - Free 3D Print Model

Search models, users, collections, and posts

Staprin3D

Hobby & DIY>Vehicles

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 3 walls, 15% infill

Designer

7.3 h

4 plates

4.8(45)

Open in Bambu Studio

Boost

193

443

608

325

Released

Description

Content has been automatically translated.

Show original

The small boat has a length of approximately 20cm

It consists of 16 individual parts
I arranged the parts on 4 plates to print in 4 colors
All individual parts can be plugged together (use some glue if desired)
The sails are then attached to the ship with thin threads

The mast and boom should be printed lying down
If the rudder is to be printed standing, it makes sense to place a raft bed underneath it
For the hull, bed adhesion should be activated inside and out

These settings are included in my print profile

PS: also check out my other boat models

Have fun building it
Staprin3D

Boost Me (for free)

If you like the design, I appreciate a 'boost me'

Membership

By signing up as a member, you receive permission to use physical prints of my models for commercial purposes.

Join

© Staprin3D

Comment & Rating (64)

@user_1231602894

Wow, thank you for this wonderful files! I made a customized Gift for my Uncle, a copy of his own ship.

The designer has replied

@Staprin3D

👍👍

@user_4020733797

i am trying to do the same for a present

@user_1413574704

crikey, went together beautifully

The designer has replied

@Staprin3D

👍👍😁

@ElementFr

Boosted

Print Profile

0.16mm layer, 3 walls, 15% infill

Very nice Thank you

The profile uploader has replied

Show original

@Staprin3D

👍

@Hollowspell

Boosted

Print Profile

0.16mm layer, 3 walls, 15% infill

Looks awesome!

The profile uploader has replied

@Staprin3D

👍👍

@zaq88zaq

Boosted

Print Profile

0.16mm layer, 3 walls, 15% infill

great design, perfect fit

@anweunna

Boosted

Print Profile

0.16mm layer, 3 walls, 15% infill

Super to print! I scaled it up by 50%, yet all parts fit together perfectly

Show original

@cthulhu28

Print Profile

0.16mm layer, 3 walls, 15% infill

Very nice and simple print.

@user_3816380015

Print Profile

0.16mm layer, 3 walls, 15% infill

this is a well done model. the only issue is with supports. it’s very difficult to clean and I ruined the first hull in that attempt. highly recommend switching to tree supports.

The profile uploader has replied

@Staprin3D

Hello, thanks for the tip, I have looked at this again and have now adjusted the print profile accordingly.

(Edited)

@Ratman2007

looks great awesome print but did you get it to float because when I tried it just tipped over not sure if I did something wrong but otherwise it looks good

The designer has replied

@Staprin3D

Hi, if you want to let it float, you can try attaching some ballast to the bottom of the keel, for example a small metal plate.

@Ratman2007

Replying to @Staprin3D :

ok thanks

@wettchinnikov

Swims ?

The designer has replied

@Staprin3D

Yes, but to prevent it from tipping over so quickly, you should attach a small weight to the keel.

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Tiny Hand Left & Right / Kleine Hand

Tekk3D

2.4 k

857

171

1 k

378