Print Profile(2)
Bill of Materials
Description
Boost Me (for free)
If you appreciate my design, please consider supporting me, thank you!
12.26: Thank you for your support! If you encounter any problems during printing or assembly, please leave a comment, and I will respond comprehensively upon seeing it. Thank you again for your support. Due to my recent busy schedule, I haven't uploaded any new works. I will allocate time to create more works you will enjoy in the future!
Important Note: If the bearings are too tight when installed into the base, it will affect rotation. If the printed holes have dimensional inaccuracies that hinder installation, you can compensate for the hole size during slicing based on your chosen material.
This is a miniature inertia drift toy car suitable for car interiors, capable of veering its body based on inertia during turns.
For the filaments, I utilized white, black, and red PETG.
- Three base bracket options are provided: flat mounting, vertical mounting, and an adjustable angle base. Depending on the situation, it can be displayed flat or vertically.
- In addition to the printed parts, one M3x8mm pan head socket cap screw, one MR63ZZ 3x6x2.5mm bearing is required. (If you are unsure where to purchase parts, you can find them at Maker's Supply).
- If you intend to use this during summer, it is recommended to prioritize PETG, ABS, or ASA, materials that exhibit relatively high temperature resistance.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (601)