Jigsaw Blade Handle (Pumpkin carver) - Free 3D Print Model

Search models, users, collections, and posts

MarcusR

Tools>Hand Tools

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

3.3 h

4 plates

4.8(65)

dual color slim version_0.2mm layer, 2 walls, 15% infill

49 min

1 plate

5.0(1)

Open in Bambu Studio

Boost

219

616

580

433

Released

Description

Update nov 12th 2024: Added optional handle with blade storage. Requires a 5x2 mm magnet.

A simple jigsaw blade (T shank) holder, primarily for carving pumpkins but should work for light woodworking as well. Heavily inspired by the blade holder made by RedManF150, but optimized for 3D-printing with the handle printed laying down for increased strength and more than a 50% cut in print time. No support or brim needed. I've printed it using Bambu PLA Basic (Black).

There are two versions, one slim and one with a slightly larger handle and a nut that doubles as hand guard (both nuts fits both handles).

Comment & Rating (96)

@killer_blue_bun

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

works great now that i know how to use it hahaha completely my fault this op

The profile uploader has replied

@marcusr

Thats no fun, is it a T shank blade? Do you have a picture on the jig saw blade shank?

@marcusr

Also, which I just reliazed isn’t obvious, the blade should be rotated 90 degrees compared to your pictures!

@killer_blue_bun

Boosted

Replying to @marcusr :

well crap haha that would be one reason it didn't fit hahaha I'll see if i can change the rating

@user_3613767217

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed great using Bambu PLA matte. In contrast to several other models I found here, this design also accepts the Black&Decker type of saw blades (see pictures). I am missing a storage for the blade in the handle and also a hole to attach a string or hang it on a hook/nail would be also nice to have.

The profile uploader has replied

@marcusr

Glad you like it! There is a version with blade storage in the 3mf, requires a magnet! The storage solution makes it hard to make a hole though. But as I like a challenge I’ll try to fix it!

(Edited)

@user_3613767217

Boosted

Replying to @marcusr :

I saw the picture, but could not find the model - I am quite new to this...

@marcusr

Replying to @user_3613767217 :

My bad, somehow I didn't upload it, but It's there now! Also a version with holes!

(Edited)

@Glasfuzzi

Print Profile

0.2mm layer, 2 walls, 15% infill

Cool part

Show original

@user_427594755

Print Profile

0.2mm layer, 2 walls, 15% infill

Great design, works well. Many thanks!

@Otomar

Print Profile

0.2mm layer, 2 walls, 15% infill

very usefull

@likeWater

Print Profile

0.2mm layer, 2 walls, 15% infill

works perfect with my DeWalt blades. the machine is broken so now, I do not have to trash them

@mmeidl78

Print Profile

0.2mm layer, 2 walls, 15% infill

Fast and easy print. Had a little trouble with the thread but after using it 1-2 times it works like a charme. Thanks!

@Niko_

Print Profile

0.2mm layer, 2 walls, 15% infill

Came out great!

@babass1664

Print Profile

0.2mm layer, 2 walls, 15% infill

Practical for small plasterboard cutouts

Show original

@maker_david

Unfortunately doesn't hold my Erauer blades enough to stop them from falling out :(

The designer has replied

@marcusr

Don’t know what Erauer blades are. Are they T shank? Do you have a picture?

@maker_david

Replying to @marcusr :

They are Erbauer Jigsaw Blades. Mine are like the ones in the picture but have a flat 't end' rather than pointed. It just didn't have enough grip. My small Black and Decker ones were gripped more but also came out. Bear in mind though that I was using it to cut a 5mm panel of compressed cardboard.

@marcusr

Okay. Thats too bad, and you put them in the right orientation (as in my pictures)? I’ve only used the handle for pumpkins, might be too weak for woodworking in some situations, sorry!