Sprinter van overhead - cab shelf bracket rear

Bracket to make a overhead shelf for your Mercedes Benz Sprinter Van. This bracket is for the back of the shelf and is secured with the bolt for the coat hook. Print 2 of these, one for each side. Probably want to use a heat resistant filament since it's going to be inside a hot vehicle. Printing mine with ASA glass-filled. You will need the front bracket to complete the shelf, see my other models for the front bracket. Link to front bracket (https://makerworld.com/en/models/720911-sprinter-van-overhead-cab-shelf-bracket#profileId-651808)

This bracket was designed for the VS30 vans (model year 2019 +) but should work pretty good for older NCV3 vans (models years 2006-2018).