Pokeball Dishwasher Indicator: AMS-optional, fast

Pokeball Dishwasher Indicator Sign: Magnetic, Quick, AMS-optional

⚡ AMS Optional - Color swaps are done by layer and there are only 3 swaps for the entire model. The AMS just makes this automatic.

I kept loading the clean dishwasher and my wife was not happy. There are a lot of great dishwasher dirty/clean indicator out there to print, but I decided I wanted one with some flair: a Pokemon-themed indicator!

🏃 Fast - 1 hour print even with color swaps!

✅ Simple - Only 3 pieces that connect very easily

🧲 Magnetic - sticks easily to the front of most dishwashers

Recommendations

• There are 3 types of magnets that will work with this model
  • 6 x 2mm round magnets
    • See Maker's Supply BoM below
    • OR check this link - https://www.amazon.com/dp/B07KJ9H31P
    • Model holds up to 6 magnets; recommend at least 4 magnets
  • Adhesive Magnetic Sheets
    • https://www.amazon.com/dp/B09ZLPQLRN
    • Use regular scissors to cut the sheet to size
  • 20 x 5 x 2 mm bar magnets
    • https://www.amazon.com/dp/B0B6PQPBP1
    • Model holds up to 2 magnets; recommended to use 2 magnets
• CA (super) glue is recommended, but almost any glue will work as there are minimal to no stresses on this object

Assembly

1. Apply magnet(s) to back of base
   1. If bar or round magnets are loose, use a dab of glue
2. Flip base over and place dial onto base with the colorful part face up
3. Flip top over and dab glue into the slots
4. Align top slots with alignment tabs on the base
5. Press base and top together and let glue cure

If you like this model please consider:

• Liking this model - helps others find it and lets me know what people want!
• Follow me - to stay up to date with the models and updates I release
• Collecting this model - so you can find it easily
• Commenting below - not exactly what you want? I can fix that! got an improvement idea? I can do that too!