Leonidas, King of Sparta
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Smart_Recycled Gris_Oscuro Transmission Distance: 0.1
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gris_Oscuro
At layer #9 (0.8mm) swap to Jade White
At layer #20 (1.68mm) swap to Black
At layer #23 (1.92mm) swap to Red
At layer #28 (2.32mm) swap to Jade White for the rest.
Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm
The model is 200x200mm in size.
Filaments used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Smart_Recycled Gris_Oscuro Transmission Distance: 0.1
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments.
Swap Instructions:
Start with Black
At layer #7 (0.64mm), swap to Gris_Oscuro
At layer #9 (0.8mm), swap to Jade White
At layer #20 (1.68mm), swap to Black
At layer #23 (1.92mm), swap to Red
At layer #28 (2.32mm), swap to Jade White for the rest.
Boost Me (for free)
If you like my work, don't hesitate to give me a boost. thank you so much
If you like my work, don't hesitate to give me a boost. Thank you so much
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)