Slim Wallet - without Cash drawer - Free 3D Print Model

Search models, users, collections, and posts

MakerVerse Designs

Tools>Gadgets

IP Report

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.15mm layer, 2 walls, 7% infill

Designer

1.7 h

1 plate

4.4(394)

PETG - 0.15mm layer, 2 walls, 7% infill

2.6 h

1 plate

4.3(32)

0.15mm layer, 3 walls, 100% infill

2.3 h

1 plate

4.1(17)

0.16 mm layer, 2 walls, 7% infill

1 h

1 plate

4.1(15)

Click to see more

Open in Bambu Studio

Boost

2081

4922

505

282

7.7 k

4.7 k

Released

Description

Updated Version available (V6):
https://makerworld.com/en/models/1416545-slim-wallet-v6-print-in-place#profileId-1471135

--------------

A print-in-place slim wallet that offers space for 7 cards.

I have frequently been asked if I can make a version of my silm wallet v5 with cash drawer just for cards without space for cash. So here is a version without the drawer, which makes the wallet much thinner.

This is the Version of Slim Wallet (V5) WITHOUT DRAWER!

The version with a drawer for cash: https://makerworld.com/en/models/697590#profileId-626646

New Version: better diameters of the springs so they don´t break
cards snap in and they don´t fall out as before
I rounded the corners a bit to make it feel better
it´s only 11mm thick
It´s print in place
has place for up to 7 card

-------------

If you want to sell printed parts from my designs or want to get the .step files of my models you can become a member of my Patreon: https://www.patreon.com/c/makerversedesigns

You like my free 3D models? I also create custom 3D designs for 3D printing: https://www.fiverr.com/s/yvRqgr6

-------------

Have fun with it and leave a like or subscribe if you like it!

If there are any suggestions for improvement, feel free to write a comment.

Comment & Rating (505)

@3DBros

Boosted

Print Profile

0.15mm layer, 2 walls, 7% infill

Good print, very simple, but make sure to measure your cards beforehand. The first time I printed it, none of my cards fit inside, so I had to upscale the print by around 3%. I wander if this is a regional thing and our card sizes are different, but once I adjusted the size to match my cards everything worked perfectly. Sure, it's a bit finicky if you flick it too hard, but it's good overall for PLA printing.

@AshFrankArt

agreed! (from the UK)

@user_4186147760

Boosted

I tried it with 7 cards, a mixture of eftpos, credit and store cards. They all fit perfectly. I'm in New Zealand, our cards are 85x54mm. I printed it in PETG.

(Edited)

@MothLuv

Print Profile

0.15mm layer, 2 walls, 7% infill

I printed it in PLA - worked beautifully. It's an effective design that does what it needs to. Only issue was that one of the little "paddles" already loosened and snapped off. It lasted about a week though.

@user_1354805407

I immediately snapped one of the paddles while fitting cards in. I'm using matte PLA so it might be part of the problem. Seems like a weak spot though

@kermannn

Boosted

same here. with PLA basic it lasted a couple of months. with PLA matte it lasted 2min

@jadenlay

Printed well and smooth in PLA matte grey but the layer adhesion on the tabs was not very strong and they broke soon after causing me to have to super glue them together. I assume this would be less of a problem with PETG or ABS? Any tips though on how to get the tabs to print in PLA without breaking off or am I totally limited by the material properties and design constraints? Would it be possible to print this sideways and successfully remove any supports?

@lallenlowe

Boosted

Matte PLA has worse layer adhesion. you could try basic PLA. I printed one in basic PLA and it is still holding up.

@poqwefeu

Print Profile

0.15mm layer, 2 walls, 7% infill

Flap broke immediately on the layer line. Maybe print it sideways. Edit: second flap also broke shortly after

@Polish_Farm

Yep printed 4 of these and two tabs broke while installing the cards. Maybe a sold area needed instead of the hollow area there. I am only one week new to this and loving it. Now need to start trying to build myself

@Polish_Farm

But with some Positivity. The cards still stay in place. So I will hold out from making new. Side note. The orange PLA that came with Bambu p1s still is perfect but the gray ones I just done in PLA+ from micro center filament broke

@aninsecurecarro

Print Profile

0.15mm layer, 2 walls, 7% infill

worked

@leoeedwards

Print Profile

0.15mm layer, 2 walls, 7% infill

there is a very distinct difference in glossyness at the bottom and it was quite difficult to get the cards out at first. but overall working and fun print!

@91von

use pla-support as a first layer interface to ha similar shine

@user_3885626471

Print Profile

PETG - 0.15mm layer, 2 walls, 7% infill

Not the fault of the profile, but I had adhesion issues with my bed. The only real problem is that I can't fit any of my cards in the wallet lol! My debit and DL won't go in. It's simply not wide enough

@jasonkunda

Print Profile

0.15mm layer, 2 walls, 7% infill

printed very nice. this is a great model

@user_986817805

Print Profile

0.15mm layer, 2 walls, 7% infill

Without any problem, I can even fit a 1.5mm thick 3D printed card in it

Show original

@Print_Core

Print Profile

0.15mm layer, 2 walls, 7% infill

Looks good but doesn't work well

(Edited)

Other Issues:The cards get stuck inside.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.