Search models, users, collections, and posts
huegorge Wild robot
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 15% infill
Designer
1.7 h
1 plate
Open in Bambu Studio
Boost
40
45
4
2
42
23
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm
The Model is 150x135.46mm in size
You may print at higher layer heights below the Min Depth of 0.5mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Overture Matte Red Transmission Distance: 2.5
This print uses 3 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #7 (0.58mm) swap to Jade White
At layer #14 (1.14mm) swap to Black
At layer #15 (1.22mm) swap to Red for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (4)