Rock Key Safe - Free 3D Print Model

Search models, users, collections, and posts

Stag 3D

Household>Garden

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 5% infill

Designer

2.4 h

1 plate

4.9(94)

0.2mm layer, 2 walls, adaptive layers and infill

2.8 h

1 plate

5.0(31)

Groove, Fuzzy skin + Dynamic layer Height + lid strength

3.3 h

1 plate

5.0(14)

Open in Bambu Studio

Boost

1951

4115

171

1.8 k

1 k

Released

Description

Boost Me (for free)

Membership

Want to sell Stag3D prints? Click here to become an official reseller.

Join

Want to sell Stag3D prints?

Simply head over to patreon.com/Stag3D or follow the link in my bio.

Looking for a better place to store your key than under the doormat? Hide your keys in plain site with this realistic rock model, featuring a recess and cover allowing you to store a key inside.

Also useful if you’re travelling and staying at an apartment, AirBnb or condo where they only have a single key.

You can either leave the rock as a single colour print, or paint to give it a more realistic effect, as shown in the pictures. An outdoor rated filament is recommended.

Comment & Rating (171)

@Komosky

Turned out great after a little paint (black, grey, brown, green followed by sanding so the edges stand out, colors match their surrounding), I did file one side of the bottom clip so it's easier to get a finger under and open the bottom.

(Edited)

@xtinytoadx

Wow, your painting looks amazing, very realistic. I am wondering if you have any advice for achieving this effect or painting related resources to look into?

@Komosky

Replying to @xtinytoadx :

Honestly I have no clue how to paint, but I do know graphic design and art direction, what I did was give it a layer of grey primer, I used cheap little tube paints from the dollar store, i did a rough brush of black and mixed in brown for a dark brown in the crevices and dry brushed as much as i could off so that it was just in the crevices, then i mixed some browns and greens and very lightly dry brushed them in random spots i tried to imagine what a rock outside would look like.

@Komosky

Replying to @xtinytoadx :

... some grey some brown from dirt some green for moss like growth, very lightly dry brushed it all in there and going over it again and again wiping it away brushing wiping etc. my last step was to make the edge stand out so i hit it lightly with some sand paper to help define the edges and lines, nature isn't perfect so don't try to make it perfect :D

@mirchaemanuel

Boosted

Print Profile

0.16mm layer, 2 walls, 5% infill

wonderful. printed with eSun PLA Clay. it seems a real rock 😊 I made sone modifications to the profile. I prefer to use adaptive layers and I added I am modifier in order to increase the filling on the bottom of the object and using lightning filling for the rest of the object

The profile uploader has replied

@Stag3D

Thanks for the positive feedback 👍🏼

@Needhamm

what's lightning filling?

@mirchaemanuel

Boosted

Replying to @Needhamm :

Hi. Lightning infill (I mistyped) is an infill type which can save material and printing time. It is extremely sparse: https://wiki.bambulab.com/en/software/bambu-studio/support You can set a lightning infill percentage of 70-80% and the slicer will place the infill only when needed. It can be used on particular objects and geometry.

(Edited)

@ssweat

Print Profile

0.16mm layer, 2 walls, 5% infill

great print

@elklab

Print Profile

Groove, Fuzzy skin + Dynamic layer Height + lid strength

I'm not 100% convinced that fuzzy skin is needed, but the extra strength is great. Primed black, drybrushed dark to light, sponged the edges light gray. Sealed with watered down Modge Podge.

The profile uploader has replied

@Jeyremy

Boosted

Oh wow it's great looking, fuzzy skin can be great, it depends on the real rocks at your place. at my place it blends in perfectly without paint :-)

@user_412120158

Print Profile

0.16mm layer, 2 walls, 5% infill

in charcoal matte.

@DawgEngr

Print Profile

0.16mm layer, 2 walls, 5% infill

Looks rocky and the lid fits very nicely! Thanks!

@Plugr12

Boosted

Print Profile

0.16mm layer, 2 walls, 5% infill

printed perfect on a1 mini. cover snapped in perfectly. Great print

@user_3567727417

Boosted

Very cool 👌🏻everything fits perfectly

Show original

@mtthlm

Print Profile

0.16mm layer, 2 walls, 5% infill

Came out looking great!

@Jeyremy

Boosted

great work, here is two boosts my friends. i added a print profile with groove and fuzzy skin. hope you like it.

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

GIF

Safe | Lock | Bank | Money Bank | Piggy Bank

Matthew Ghost

17 k

8.2 k

Fake Rock Key Safe

Nehar

1 k

513

The Rocktopus (Dwayne "The Rock" Johnson)

Thinkable

23.4 k

2.5 k

Rock Key Safe

Eldar Armory