Hedgehog Gates

There are things that you see and immediately like.

This is what happened to me when I depicted a hedgehog gate. The basic idea of the whole thing is to make fenced gardens, properties, etc. accessible to hedgehogs and thus give these animals back a piece of their living space.

The whole thing is very simple, you make a small opening of approx. 15 x 15cm at the bottom of the fence and screw the hedgehog gate in front of it. Since the original gate was made of plywood, which then had to be sawn out with a fretsaw or scroll saw, this is unfortunately a project that is difficult for many to implement. And this is where 3D printing comes into play, with which I can hopefully make the hedgehog gates accessible to many. Certainly a nice project for companies, schools, kindergartens or communities, because there are plenty of fences and a small, colorful eye-catcher is advertising for a good cause.

The only thing that is important to me is that the hedgehog gates must under no circumstances be offered commercially. However, passing it on in return for a donation, which is then passed on to an association that is committed to protecting hedgehogs, is desired and permitted.