Lenovo Tab M10 Gen 3 / Wall Mount / Wall Mount
Print Profile(2)
Description
I needed a narrow wall mount for my smart home tablet (Lenovo Tab M10 Gen 3). The mount should be as narrow as possible and not too noticeable. For this I designed a simple frame which can be attached to the wall with 4 screws. Of course, only 2 holes can be used if you don't want to make so many holes in the wall.
The wall mount has two cutouts for power and controls (volume up, volume down, on/off).
The tablet is held directly on the frame by small noses (see screenshots). I tested the print with cheap PLA and with the original Bambulab PLA (matte). Both fit perfectly in my case. If the dimensions don't quite fit for you, please leave a comment.
The print time on my Bambulab is about 1 hour and consumes ~30g of PLA material.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)