DuPont/protoboard/breadboard wires storage
Print Profile(1)
Bill of Materials
- M6 or 1/4" 200 mm threaded rod x 1:
- M6 or 1/4" nut x 2:
- M6 or 1/4" washer x 1:
Description
I'm presenting you a customizable DuPont/breadboard wires holder including a container .
Key points:
- It can store wires of length up to 230 mm.
- By adding holders in between the outer ones it can store wires of various lengths.
- It can store up to 96 full length wires.
- It consist of an configurable holder and a container for it.
- Compact design.
- Dust free, because of a container.
- Loose container for easier inserting of a holder with wires.
For a basic setup you will need to print:
- 2x DupontWireHolderWithKnob
- 1x DupontWireHolderContainer
Assembly of the basic setup:
- Tap the M6 thread into the holders.
- Prepare 1x 200 mm of M6 threaded rod, 2x M6 nut and 2x M6 washer.
- Screw a nut on the each side of a threaded rod.
- Add washers on both sides.
- Screw a holder on each side of the threaded rod.
- Tighten the nut against the holders, while making sure that both holders are aligned.
You can also cut ¼" threads and use an appropriate rod, nuts and washers!
You can add holders without a knob in between the outer ones in order to store shorter wires.
If needed you can use a slicer modifier to remove unnecessary arms.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)