Cheerful Little Dog Holding a Sign

Dimensions: The model's preset height is 60mm, with 6 adorable puppies. You can resize the model as needed for printing. To adjust the size, you need to configure it in your desktop slicing software

Supports: Supports are pre-set, easy to remove, and the layer height is 0.2mm. You can print directly from the mobile app. Remember to be careful when removing the supports around the whiskers.

For a finer print quality, you can set a lower layer height in your desktop slicing software ( when a pop-up appears, be sure to choose "Use modified value"). The printing time will increase accordingly.

Filament:

The photos were taken using Bambu PETG HF Gray 33101 Click here to buy

We've also included a back-to-school auspicious Qilin model. Click the link

Feel free to leave comments if you have any questions. We look forward to your feedback!

3D Printing Precautions
Based on my experience, here are some things to keep in mind for everyday printing:
1. Clean your print bed regularly! If possible, it's recommended to wipe the print bed with a damp towel before each print to reduce first-layer adhesion issues.
2. Ensure your filament is dry. If using an AMS, replace the desiccant in a timely manner to minimize stringing.
3. Update your desktop slicing software and mobile app to the latest versions. Ensure your printer firmware is up to date.
 

For more questions and advice, you can consult our customer service or check out theBambu Official Wiki:
Bambu Handy (mobile app) printing tutorial Click here to view
Common questions about filament and accessories Click here to view
Bambu Studio (desktop slicing software) printing tutorial Click here to view