3x1.5x5 Stackable Gridfinity Bin for AA Batteries - Free 3D Print Model

Search models, users, collections, and posts

TooManyThings

Tools>Organizers

IP Report

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

4 h

2 plates

5.0(150)

0.2mm layer, 2 walls, 15% infill

1.6 h

1 plate

5.0(7)

2 colors without AMS (pause)

1.8 h

1 plate

5.0(2)

Reduced height

3.8 h

2 plates

5.0(2)

Open in Bambu Studio

Boost

258

1387

229

121

1.9 k

1.2 k

Released

Description

This bin from my collection of stackable Gridfinity battery holders. It holds 16 AA batteries. I also have versions for other batteries here.

These were modelled after the factory blister packs with finger access and other features added to improve access. The inside-bottom of each bin is labelled for faster identification of empty bins. The print profile contains plates with single color and two color versions.

The base is intended for the standard Gridfinity grid and can be be placed at any position or half-way position on the grid. When placed next to a second bin, the pair take up a 3x3 space. Where there half-width strip on one edge of the grid, such as from my Gridfinity interlocking baseplate generator, they work very well for utilizing that space.

I place my empty bins under a bin of a different color so I know when I am running low.

Comment & Rating (229)

@lucagiazzi

perfect print, hopefully the author will also make other stackable designs for Gridfinity

The designer has replied

Show original

@TooManyThings

Wow, nice print! Thanks for sharing the photos. If you have requests for other bins, let me know and I will see what I can do.

@TooManyThings

What coin cell holders are those? Do they stack?

@lucagiazzi

Replying to @TooManyThings :

it would be cool to have a stackable SD and mini SD card holders, I can't find any of them online. Also your design with the double color and the text is one of the best I found, you should create an entire set of gridfinity products all with the same design

@Nabistay

Boosted

I just printed out the C and 9V battery ones, would love a D battery in this style! or CR2032 button batteries! Also some higher capacity AA or AAA bins would be AMAZING. Costco batteries come in 48 packs, and buying more when we get to about ten left or so means we have up to 60 AA or AAA in our house at any one time! (and our battery drawer is not great for stackability..)

(Edited)

The designer has replied

@TooManyThings

Thanks for the photos. They came out great. Thanks also for your support, it is also appreciated. I might make a.D bin this weekend, although it will be larger than all the other bins. For the AA/AAA bins, sounds like you are looking for something a bit taller/longer. For the current bins, you would need 4 AA and 2 AAA for your needs. I am not sure I could cleanly get them to double capacity without them taking up a similar amount of space. These are quite a bit of work to make so I will probably have to leave it.

@TooManyThings

Hi, a D cell bin is on the way. I am just waiting on a printer part to arrive from Bambu so I can do the final test print. Shipping is slow in my region at the moment - there seems to be a big backlog from the holidays.

@TooManyThings

Replying to @TooManyThings :

Hi, the D cell bin is available now: https://makerworld.com/en/models/1006614

@Psychobob

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Prints well and I like the overall design, all rechargeable batteries I accrued over the years fitted nicely (Duracell, Amazon basics). I did find when the bottom row is completely full, I found it a bit akward to get the very first battery out from that row - but only an issue on the first one you remove. Was the first time I printed something using 1/2 grid sizes, glad to say it all fit standard grid baseplates just fine.

The profile uploader has replied

@TooManyThings

Hi, for the bottom row, you might just need to turn the bin 180 degrees to use the finger slot at the other end. Even when I use my largest finger (thumb) in the slot, the batteries pop up with a small effort.

(Edited)

GIF

@TooManyThings

BTW, thanks for sharing your feedback and photo. Always appreciated.

@Romain12345

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect solution. I hope other battery format will be upload.

The profile uploader has replied

@TooManyThings

What other battery formats would you like to see covered? I will see what I can do. BTW, your bins look good. Thanks for sharing the photo and for the boost.

(Edited)

@TooManyThings

Replying to @TooManyThings :

Hi, I have a D bin available now which you might be interested in: https://makerworld.com/en/models/1006614

(Edited)

@NordicMaker.

Boosted

I usually prefer making my own models, but your design is absolutely spot on! The amount of thought that went into this is amazing. Really well done – I’m giving this a well-deserved Boost!

The designer has replied

@TooManyThings

Hey thanks!

@onlineMaker

Print Profile

0.2mm layer, 2 walls, 15% infill

printed perfectly. using generic black pla and red silk+ pla

@MonsieurCaron

Print Profile

2 colors without AMS (pause)

Work well with my gridfinity grid.

The profile uploader has replied

@Simiridium

awesome, thank you!

@getoutdoors7

Print Profile

0.2mm layer, 2 walls, 15% infill

I love these. They work great for battery storage.

The profile uploader has replied

@TooManyThings

Thanks for sharing your photo, it looks good.

@Simiridium

thank you, worked out great 👌🏼 I made a new print profile with a pause for the second color on top without AMS.

The designer has replied

@TooManyThings

Nice profile and photo. I see you added one for the AAA bin also. Thanks!

@dudeakhtar

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Really nice AA Gridfinity battery bins. I liked them so much in fact I printed 4 to hold an entire box of Kirkland AA’s and some surplus Amazon Basics. The 1.5 Gridfinity size makes it a perfect fit, just print them in pairs so you have an whole number of Gridfinity squares left. 10/10 from me!

The profile uploader has replied

@TooManyThings

I am LOL here, that is a lot of batteries. 4 bins and they are still coming out the top! Glad to hear it is working well for you and thank you for your support.

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

AA Battery Magazine

SD Studios

27.2 k

9.9 k

Beer battery crate

JS Ball python

24.7 k

7 k

Standard Gridfinity Bin Set

Finn

38.2 k

6.8 k

Gridfinity Bins Stackable

Foixtra

6.3 k

684