Search models, users, collections, and posts
Modern Key Hanger
IP Report
Print Profile(5)
0.16mm layer, 3 walls
Designer
22 min
1 plate
0.16mm, high strength, enjoy!
Designer
1.4 h
1 plate
0.16mm layer, 2 walls, 20% infill, Strong and all in one print (also A1 mini)
1.7 h
1 plate
0.16mm layer, 2 walls, 100% infill
27 min
1 plate
Click to see more
Open in Bambu Studio
Boost
831
1797
311
144
2.4 k
1.8 k
Released
Description
Simple to print and (hopefully) an aesthetically pleasing key holder that can fit in any household.
You print the hexagon platform and any number of keychains you need. I personally used glue for sticking it on the wall, however strong double-sided tape should be more than enough to hold it without any problems. As requested, I also added files with holes for screws!
Printing instructions
- Key Hanger - Platform: Print without support, since you do not need much detail in a vertical direction, layer height of 0.24-0.32 is a good trade-off between print speed and the final quality.
- Keychain - Layer height between 0.08 and 0.2. I used 100% infill.
My Twitter :)
In case you have any requests, feel free to send me a message and I will try to help you out!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (311)