Search models, users, collections, and posts
Gon Freecs, Kite, Pitou Hunter x Hunter Hueforge
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
12.9 h
1 plate
Open in Bambu Studio
Boost
47
94
3
2
41
16
Released
Description
Thanks for checking out my hueforge! Please leave a like and share!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 191.39x245mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA 3DHojor Black Transmission Distance: 0.3
PLA Sunlu Dark Gray Transmission Distance: 3
PLA Lotmaxx Matte Grey Transmission Distance: 1
PLA 3DHojor White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Gray
At layer #13 (1.12mm) swap to Grey
At layer #20 (1.68mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (3)