Magnetic Pin Frames (Compatible with Cosmere Pins)

Frames are designed to easily display Cosmere pins, either individually, or grouped.

There are magnets on all sides so they can support each other and allow for some creative display options.

The back is smooth and has a toothed opening to support wall mounting (adhesive strips, screws, nails, etc).

To install:

-Place the front frame (thinner piece with the 4 cubes on the corners) face down (cubes up)
-Place the pin with the back face down in the recess on the front frame (it should be thick enough to keep the pin from touching the surface under it)
-Align the back frame (thick piece with holes at the corner) with the front frame, ensuring you can see the "DRAGONSTEEL" logo through the toothed cutout
-Gently press the corners. You will feel the front frame snap into the back frame.

While not tested for repeated use, the back frame has a small lip to allow the front frame to be removed if you ever need to get the pin out

for the magnets, I sized for 8mmx3mm round magnets