OpenForge Wooden Inner Corners

Remix onto MakerWorld of devonjones's OpenForge 2.0 wooden inner corner tiles.

Openlock triplex base combined with a small supporting block at the center so that the whole thing can be printed in one go - no more gluing the base floor and pillar together!

My profiles use variable layer height to give the wooden grain texture better detail at the cost of very slightly increased print time.

In my print profile, one plate has low walled corners and other has full wall height corners. Pick the corners you want and then you can use the “Print N models” feature of the app to print however many you want.

All designer print profiles are A1 Mini compatible.

How to use:

• Print the tiles you want to use.
• Print some OpenLOCK clips.
• Remove the small supporting bits from the tiles (each connection point has 2), I use a small cutter.
• Connect the tiles together!

I'll slowly be going through devonjones' openforge tiles and remixing them with bases to MakerWorld, I'll prioritise those which I need most myself but if you have requests feel free to tell me.