Thermostat controller vertical bracket

Recently, I needed a thermostat controller.

I needed to install it vertically next to my HVAC and I couldn't find a bracket anywhere.

I decided to create one.

It is open on the top because mine is already installed and I didn't want to disconnect the wires.

This is simple and can be installed using 4 screws.

I decided to double-side tape mine.

Here is the thermostat controller I made my bracket for :

https://www.amazon.com/dp/B07R44SGLX

There are plenty of different brands available online and they are almost always the same size/format.

You have remove the small orange clips on the thermostat.

The last plate in the .3mf is the current model but there are other models on other plates if you want to modify or apply to your needs.

I printed mine with a raft and tree support.

Enjoy, but not too much !