AMS Lite A1 Top Mount - No Tilt Remix

✨ Enjoy my designs? Please boost, like, and follow! Your support makes a big difference! ✨

If you'd like to go further, you can buy me a coffee here: ☕ buymeacoffee.com/arzhanglotfi.

Thank you!

AMS Lite A1 Top Mount - No Tilt Remix

This is a ‘’no tilt'' version of the AMS Top Mount for better clearance and aesthetics.

• The angle of the part is still tilted by 5 degree which makes the AMS standing straight.
• The latch is thickened and got crew holes to be reinforced.
• I added foam pads under my Z Axis stiffener to make the whole printer more stabile. I don't like the printed ones.
• Mine works perfectly but use this at your own risk.
• I printed with Bambu Lab - PLA Basic - Light Grey to match the printers main color

You can buy the required hardware as a kit from here:

http://store.bambulab.com/products/ams-lite-top-mount-screws-kit

Also Add Two M3 screws to the locking mechanism to enhance stability. Idea comes from @orangetech

If you already have the original one printed, I still recommend evrything except the big screw because not just the top but every part is different a bit. But if you want you can just print the top to check out if you like it.

Original Creation:

https://makerworld.com/en/models/92486?designId=92486#profileId-100105

ENJOY!

✨ Enjoy my designs? Please boost, like, and follow! Your support makes a big difference! ✨

If you'd like to go further, you can buy me a coffee here: ☕ buymeacoffee.com/arzhanglotfi.

Thank you!