amzaldua

cover

IMG_6193.jpeg

plate_1.png

plate_2.png

2024-10-16_b2b4510f1875e8.jpeg

<h4>Special print settings:</h4><ul><li>0.2mm layer height (for 0.4 nozzle);</li><li>print WITH support;<ul><li>“Type”: tree (auto)</li><li>"Style": Default</li><li>“Threshold angle”: 45º</li></ul></li><li>“Seam position”: Back</li></ul>

0.4mm nozzle, 0.2mm layer, 2 walls, 15% infill

3dp.dude

IMG_0734.jpg

Skärmbild 2024-11-20 155615.png

IMG_0733.jpg

As i already have a few other mask's made and all of them are scaled to 170mm z-height, this is also a scaled down profile to match.&nbsp;Printed with eSun ePLA-Lite (Grey)In my printed i accidently had seam position (aligned) set, as you can see the ugly seam in the ear. Fixed in this profile!&nbsp;Quality<ul><li>0.2mm layer height</li><li>seam position (back)</li><li>elephant foot compensation (0.15mm)</li></ul>Strength<ul><li>4 walls</li><li>12% infill (cross hatch)</li></ul>Speed<ul><li>inner wall (120mm/s)</li><li>sparse infill (200)</li><li>internal solid infill (200)</li><li>Overhang speed- 60mm/s (10%, 25%)- 30mm/s (25%, 50%)- 10mm/s (50%, 75%)- 10mm/s (75%, 100%)</li><li>Acceleration- normal printing speed (3000)- outer wall (2000)</li></ul>Support<ul><li>enable support (yes)</li><li>type (tree auto)</li><li>threshold angle (35)</li><li>remove small overhangs (no)</li><li>top z-distance (0.28mm)</li><li>base pattern spacing (3mm)</li><li>top interface layers (3 layers)</li><li>bottom interface layers (3 layers)</li><li>branch angle (60)</li></ul>Filament settings (Setting Overrides)<ul><li>Retraction- length: 1.1mm- z-hop (0.2mm)- z-hop type (auto)- retract (1.1mm)- retract speed (35mm/s)- wipe while retracting (yes)- wipe distance (1mm)</li></ul>

0.2mm layer, 4 walls, 12% infill - scaled z-height to 170mm

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Kitsune Fox Mask

This mask is based on a design from the <a target="_blank" href="https://www.thingiverse.com/thing:4086456" rel="nofollow noopener">Stonemask from Thinkverse</a> page, with pre-applied colors and optimized print settings for a hassle-free experience. The model is fully prepared for direct printing—no need for additional painting. I’ve tested the parameters with a real print to ensure high-quality results. It prints easily and is ready to use right off the printer.&nbsp;Ideal for cosplay, decoration, or display, this mask can be scaled to fit different sizes and is ready to bring Tanjiro’s look to life! Contents of the file:<ul><li>Plate 1: Colured Tanjiro&#39;s Mask (three colors)</li><li>Plate 2: Plane Tanjiros Mask (one color)</li></ul>&nbsp;<h4>Special print settings:</h4><ul><li>0.2mm layer height (for 0.4 nozzle);</li><li>print WITH support;<ul><li>“Type”: tree (auto)</li><li>&#34;Style&#34;: Default</li><li>“Threshold angle”: 45º</li></ul></li><li>“Seam position”: Back</li></ul>&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like my work, you can support me by giving it a boost; it’s free.</boostcontent></boostme>or even by <a target="_blank" href="https://buymeacoffee.com/amzaldua" rel="nofollow noopener">buying me a coffee</a>&nbsp;Thank you!

Tanjiro´s Mask

ASIA

Print Profile(2)

Description

Special print settings:

Comment & Rating (71)

This remix is based on

License

Related Models