Search models, users, collections, and posts
Philips One Blade Travel Case
Remixed by
IP Report
Print Profile(3)
0.2mm layer, 3 walls, 15% infill
Designer
7.4 h
2 plates
A1 Mini - Full Size - 0.2mm layer, 3 walls, 15% infill
8 h
2 plates
0.2mm layer, 3 walls, 15% infill
8.6 h
2 plates
Open in Bambu Studio
Boost
637
1653
249
114
1.7 k
898
Released
Description
This case was specifically created to hold the Philips One Blade razor with the blade inserted optimally.
To facilitate rapid drying after using the still wet One Blade, I have included strategic openings in the design of the case.
In case you are interested, you can find the model of this case that I purchased through the following link:
https://amzn.to/3HAeftK
Not compatible with the ONE BLADE 360 version
Even if it is not identical, you are free to organize the internal space in the way that you find most comfortable for your needs.
You will need the use of 6 screws of size M3x20mm, mounted as shown in the photos attached to the product.
If you don't have screws at home, a user suggested using these screws: https://makerworld.com/it/models/841652-m5-m6-screw-kit-screws-washers-nuts#profileId-787996
However, I recommend iron ones for longer life.
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (249)